This adds two options that are useful for user units. In particular, it
is useful to check ConditionUser=!0 to not start for the root user.
Closes: #5187
Many eMMC devices have separate boot partitions that aren't part of the
normal partition table that show up as /dev/mmcblk[0-9]boot[0-9]. These
partitions are generally small (128KB to 16MB) and typically hold a boot
loader, boot loader data or a recovery image. Match these and create
-boot%n by-path symlinks.
Prior to this change by-path symlinks for the main device would be
incorrectly linked to one of the boot partitions.
For instance before:
/dev/disk/by-path/platform-219c000.usdhc linked to /dev/mmcblk1boot1
Now:
/dev/disk/by-path/platform-219c000.usdhc links to /dev/mmcblk1
/dev/disk/by-path/platform-219c000.usdhc-boot0 links to /dev/mmcblk1boot0
/dev/disk/by-path/platform-219c000.usdhc-boot1 links to /dev/mmcblk1boot1
On systems that support multiple SD/MMC devices it can be essential to
have by-path links to these devices since device names vary depending on
which other devices are connected.
Commit f5938e8ff3 started dropping all
messages before we become a monitor, but the last one was getting
through.
This drops also the last NameLost message, which indicatse the switch
from a regular peer to a monitor.
We parse the string supplied in NTP_SERVERS during configuration under an
assert_se(). Right now we will accept pretty much anything there, but in case
we are more picky in the future, add a simple test which checks that we can
actually parse whatever is in NTP_SERVERS so that we don't fail the assertion
at runtime.
On a machine without a VGA console, /dev/tty{0,1,…} exist, so
systemd-vconsole-setup is started, but all setfont operations fail.
setfont has a bunch of return codes for different failure modes. It uses
EX_OSERR when the communication with the kernel using ioctls fails. This isn't
too specific, but at least it's only used this general class of errors. Let's
swallow the error in this case to avoid systemd-vconsole-setup.service failing
on cloud vms.
On a machine from https://bugzilla.redhat.com/show_bug.cgi?id=1272686#c4:
$ build/systemd-vconsole-setup
setfont: putfont: 512,8x16: failed: -1
putfont: PIO_FONT: Invalid argument
/usr/bin/setfont failed with error code 71.
Setting fonts failed with a "system error", ignoring.
$ SYSTEMD_LOG_LEVEL=debug build/systemd-vconsole-setup
Found container virtualization none.
Sysfs UTF-8 flag enabled
UTF-8 kbdmode enabled on /dev/tty0
Executing "/usr/bin/setfont -C /dev/tty0 eurlatgr"...
setfont: putfont: 512,8x16: failed: -1
putfont: PIO_FONT: Invalid argument
/usr/bin/setfont failed with error code 71.
Executing "/usr/bin/loadkeys -q -C /dev/tty0 -u us"...
/usr/bin/loadkeys succeeded.
Setting fonts failed with a "system error", ignoring.
$ lspci | grep -i vga
$ ls /dev/tty?
/dev/tty0 /dev/tty2 /dev/tty4 /dev/tty6 /dev/tty8
/dev/tty1 /dev/tty3 /dev/tty5 /dev/tty7 /dev/tty9
If we have a better test for /dev/tty? being connected to something that has a
font, we could avoid running setfont at all… ATM, I'm not aware of a simple
test like that.
This makes it quite a bit easier to see what failed.
strv_join is called inline in log_debug so that it is under the conditional
that kills the whole thing if debugging is disabled.
Currently the local variable `address` is unintialized if the DHCP lease
doesn't provide a router address (when r == -ENODATA). Thus the
subsequent call to route_scope_from_address will result in accessing an
unintialized variable.
As a matter of fact, sd-dhcp-client ignores DHCP leases without an
address so link_dhcp_set_routes probably will never be called without a
valid address.
Since commit 36c16a7cdd ("core: rework unit timeout handling, and add
new setting RuntimeMaxSec=") TimeoutSec=0 in mount units has
cause the mount to timeout immediately instead of never as documented.
There is a similar problem with Socket.TimeoutSec and Swap.TimeoutSec.
These are easily fixed using config_parse_sec_fix_0().
Automount.TimeoutIdleSec looks like it could have the same problem,
but doesn't because the kernel treats '0' as 'no timeout'.
It handle USEC_INFINITY correctly only because that constant has
the value '-1', and when round up, it becomes zero.
To avoid possible confusion, use config_parse_sec_fix_0() as well, and
explicitly handle USEC_INFINITY.
LLDP should be received on bridge slaves as they're the entities
directly connected to a peer. Receiving LLDP on the bridge device makes
little sense, Linux by default even filters out LLDP going onto the
bridge device.
Flip the current logic, receive LLDP on bridge slaves don't listen for
them on the bridge itself.
Let's log about this in the caller.
Doesn't really matter, but let's do something about my OCD, and
propagate errors properly, so that the caller can log about them.
Let's downgrade the warning introduced by
955d99edc7 to debug, as we really
shouldn't log at more than debug level from library code.
(And while we are at it, print the MTU as the right (unsigned) type in
the format string.)
unit_name_template returns -EINVAL if the unit name is not a template, but
the code assumed that OOM is the only failure mode. Fix that to emit the warning
if a non-template unit is encountered (because in this case we expect the name
to match exactly), and just skip the warning on other errors (presumably oom).
Fixes#5543.
DHCP responses could include static routes, but unfortunately not an
option to tell what scope to use. So it's important that the client sets
it properly.
This mimics what the `ip route add` command does when adding a static
route without an explicit scope:
* If the destination IP is on the local host, use scope `host`
* Otherwise if the gateway IP is null (direct route), use scope `link`
* If anything else, use the current default `global`.
Fixes#5979.
*scanf functions set errno on i/o error. For sscanf, this doesn't really apply,
so (based on the man page), it seems that errno is unlikely to be ever set to a
useful value. So just ignore errno. The error message includes the string that
was parsed, so it should be always pretty clear why parsing failed.
On the other hand, detect trailing characters and minus prefix that weren't
converted properly. This matches what our safe_ato* functions do. Add tests to
elucidate various edge cases.
All those uses were correct, but I think it's better to be explicit.
Using implicit errno is too error prone, and with this change we can require
(in the sense of a style guideline) that the code is always specified.
Helpful query: git grep -n -P 'log_[^s][a-z]+\(.*%m'
MESSAGE=data\n and MESSAGE\n40000000data\n are both valid serializations, so
they should be stored in the journal. Before, MESSAGE, SYSLOG_FACILITY,
SYSLOG_IDENTIFIER, PRIORITY, and OBJECT_PID would be only honoured if they were
given in the first form.
Fixed#5973.
For all except the last entry in a single packet, we would dispatch the
message to the journal, but not forward it, nor perform proper cleanup.
Rewrite the code to process each entry in a helper function, and make
server_process_native_message() just call this function in a loop.
Fixes#5643.
v2:
- properly decrement *remaining when processing entry separator
The intent of the hwdb entry for the Cube iWork8 air tablet buttons is
to fix them being swapped. The kernel is using left-meta for the
home key (it is being treated as the windows key on keyboards, as it has
a windows logo on most x86 tablets).
Fix the hwdb entry to only swap the buttons and not change the keycode
emitted by the home key.
timex::time::tv_sec can have different sizes depending on the
host architecture. On x32 in particular, it is 8 bytes
long while the long int type is only 4 bytes long. Hence,
using li as a format specifier will trigger a format
error. Thus, better use PRI_TIME instead of li which is
actually the right format specifier to use for time_t.
Lennart Poettering
Lucas Werkmeister
Felipe Sateler
George McCollister
Zbigniew Jędrzejewski-Szmek
Tom Gundersen
Timothée Ravier
Michael Biebl
Daniel Wang
codekipper
Evgeny Vereshchagin
John Paul Adrian Glaubitz
NeilBrown
tomty89
sjoerd-ccu
Mantas Mikulėnas
AsciiWolf
Matthias Greiner
Djalal Harouni
Alexey Brodkin
Hans de Goede
Matija Skala