Commit Graph
11872 Commits
Author SHA1 Message Date
Zbigniew Jędrzejewski-Szmek fd587c876d systemd-python: fix gcc warning
src/python-systemd/_reader.c: In function Reader_get_catalog:
src/python-systemd/_reader.c:912:53: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
             assert(mid_len > l);
                            ^
2013-07-26 11:28:15 -04:00
Zbigniew Jędrzejewski-Szmek a6c0b31d50 build-sys: use pkg-config for python compilation flags
Python 2.7, and 3.2 and higher support querying compilation
flags through pkg-config. This makes python support follow
rules similar to various other optional compilation-time
libraries. New flags are called PYTHON_DEVEL_CFLAGS and
PYTHON_DEVEL_LIBS, because PYTHON (without _DEVEL), is
already used for the python binary name, and things would
be confusing if the same prefix was used for two things.
configure has --disable-python-devel to disable python modules.

One advantage is that CFLAGS for modules gets smaller:
- -I/usr/include/python3.3m -I/usr/include/python3.3m -Wno-unused-result -DDYNAMIC_ANNOTATIONS_ENABLED=1 -DNDEBUG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -D_GNU_SOURCE -fPIC -fwrapv
+ -I/usr/include/python3.3m
as does LIBS:
- -lpthread -ldl -lutil -lm -lpython3.3m
+ -lpython3.3m

Support for Python 2.6 is removed, but can be easily
restored by using
PYTHON_DEVEL_CFLAGS="$(python2.6-config --cflags)",
etc., as ./configure parameters.

https://bugs.freedesktop.org/show_bug.cgi?id=57800
2013-07-26 11:28:15 -04:00
Zbigniew Jędrzejewski-Szmek b59f043c3d systemd-python: use modern C 2013-07-26 11:28:15 -04:00
Lennart Poettering a521ae4a56 systemctl: rearrange --help output a bit 2013-07-26 17:11:41 +02:00
Lennart Poettering 223ab9345d systemctl: remove "load" command
"systemctl load" has always been racy since the GC could hit any time,
before making use of the loaded unit. Very recent systemd will run GC
immeidately after all unit state changes which has the effect that the
the effect of "systemctl load" is completely gone now, so let's remove
the support for it in "systemctl" for good.
2013-07-26 17:05:43 +02:00
Lennart Poettering a65615ca5d systemctl: move set-log-level to systemd-analyze
"systemctl set-log-level" is a command for analysis and tracing hence
"systemd-analyze" should be the better home for it, thus allowing us to
make the overly large "systemctl" a bit smaller.
2013-07-26 16:59:55 +02:00
Lennart Poettering 9ea9d4cf16 systemctl: move "dump" command from systemctl to systemd-analyze
It's an analysis command and its format is explicitly not covered by any
stability guarantees, hence move away from systemctl and into
systemd-analyze, minimizing the already large interface of systemctl a
bit.

This patch also adds auto-paging to the various systemd-analyze commands
where that makes sense
2013-07-26 16:36:25 +02:00
Lennart Poettering 6577c7cea7 core: allow setting RemainAfterExit= for transient services 2013-07-26 16:09:25 +02:00
Kay Sievers 39bdfa31f2 shared: split mkdir_*() and mkdir_*_label() from each other
Avoid pulling-in selinux for tools which just create directories
but not need to fix the selinux label.
2013-07-26 04:13:55 +02:00
Kay Sievers 819da59577 shell-completion: add kernel-install 2013-07-26 02:40:09 +02:00
Dave Reisner ec99834cb0 tmpfiles-setup: exclude /dev prefixes files
Fixes Arch Linux bug: https://bugs.archlinux.org/task/36259
2013-07-24 12:04:00 -04:00
Dave Reisner 5c7951141f tmpfiles: introduce --exclude-prefix
The opposite of --prefix, allows specifying path prefixes which should
be skipped when processing rules.
2013-07-24 12:04:00 -04:00
Dave Reisner a2aced4add tmpfiles: support passing --prefix multiple times 2013-07-24 11:10:05 -04:00
Tom Gundersen 15a722007d udev: static_node - don't touch permissions uneccessarily
Don't set default permissions if only TAGS were specified in a rule.
2013-07-24 15:13:00 +02:00
Tom Gundersen 490f008762 udev: log error if chmod/chown of static dev nodes fails 2013-07-24 15:13:00 +02:00
William Giokas 80d39fbb3e shell-completion: Add machinectl zsh completion 2013-07-24 09:11:36 -04:00
Zbigniew Jędrzejewski-Szmek 4c10771ce2 initctl: use irreversible jobs when switching runlevels
Spotted by uau in #systemd.
2013-07-24 09:11:36 -04:00
Jesper Larsen e946948eff README: Bump to Linux 3.0
Support for writing to cgroup.procs was introduced in 3.0
2013-07-24 12:42:07 +02:00
Lennart Poettering d07f7b9ef2 journal: immediately sync to disk as soon as we receieve an EMERG/ALERT/CRIT message 2013-07-24 12:34:28 +02:00
Lennart Poettering 8b18fdc195 core: synchronously block when logging
Previously, the logging sockets were asynchronous and if clogged we'd
lose messages. We did this to be extra careful given that PID 1 might
need to spawn the logging daemon as response to PID 1's own log messages
and we really should avoid a deadlock in that case.

As it turns out this causes loss of too many messages, hence make the
socket blocking again, however put a time limit on it to avoid unbounded
deadlocks in the unlikely case they happen.

https://bugs.freedesktop.org/show_bug.cgi?id=66664
2013-07-24 12:34:28 +02:00
Dave Reisner 41f1a1da57 remove systemd-timestamp from sources
No sense in keeping this around if support for reading RD_TIMESTAMP has
been removed.
2013-07-23 11:41:54 -04:00
Kay Sievers 21bf2ab082 remove left-over initrd time stamp handling 2013-07-23 12:26:59 +02:00
Michael Biebl 0778c3db87 man: Fix copy&paste error 2013-07-23 05:03:17 +02:00
Michael Biebl f4f8f7b546 README Bump minimum required version of kmod
See edeb68c53f.
2013-07-23 05:02:54 +02:00
Lennart Poettering 251cc81942 build-sys: prepare 206 2013-07-23 01:32:36 +02:00
Maciej Wereski 33b521be15 NEWS: fix mistake 2013-07-23 00:51:08 +02:00
Kay Sievers efa3c0af8e bus: update for kdbus changes 2013-07-22 23:00:31 +02:00
Kay Sievers 28f5c779e5 TODO: update 2013-07-22 20:17:26 +02:00
Tom Gundersen 7e380bba1c kmod-static-nodes: remain after exit 2013-07-22 17:11:19 +02:00
Tom Gundersen ef7e6e0598 systemd-tmpfiles-setup-dev: remain after exit
Without this, tmpfiles-setpu-dev  would be re-run if any other service,
which pulls in basic.target, was started after setup-dev was finished
and before basic.target was active.
2013-07-22 17:01:46 +02:00
Lennart Poettering 408f281bc7 NEWS: prepare half a NEWS file for upcoming 206 2013-07-22 00:17:00 +02:00
Jan Engelhardt fbce11397f man: wording and grammar updates
This includes regularly-submitted corrections to comma setting and
orthographical mishaps that appeared in man/ in recent commits.
2013-07-21 11:23:58 -04:00
Kay Sievers 44affdc5fd rules: net, tty description - ask hwdb explicitly for pci data 2013-07-21 16:33:27 +02:00
Shawn Landden 3c475ce44e shared: fix build on !x86 2013-07-20 21:33:10 -04:00
Kay Sievers eb75d0ed05 man: udev - add section about hwdb 2013-07-21 01:33:13 +02:00
Zbigniew Jędrzejewski-Szmek 459da00fe6 core: correct dbus parameter direction 2013-07-20 16:12:20 -04:00
Kay Sievers bf7f800f2b rules: drivers - always call kmod, even when a driver is bound to the device
On Sat, Jul 20, 2013 at 12:56 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> After a recent change present in 3.11-rc1 there is a driver, called processor,
> that can be bound to the CPU devices whose sysfs directories are located under
> /sys/devices/system/cpu/.  A side effect of this is that, after the driver has
> been bound to those devices, the kernel adds DRIVER=processor to ENV for CPU
> uevents and they don't match the default rule for autoloading modules matching
> MODALIAS:
>
> DRIVER!="?*", ENV{MODALIAS}=="?*", IMPORT{builtin}="kmod load $env{MODALIAS}"
>
> any more.  However, there are some modules whose module aliases match specific
> CPU features through the modalias string and those modules should be loaded
> automatically if a compatible CPU is present.  Yet, with the processor driver
> bound to the CPU devices the above rule is not sufficient for that, so we need
> a new default udev rule allowing those modules to be autoloaded even if the
> CPU devices have drivers.
2013-07-20 14:31:53 +02:00
Holger Hans Peter Freyther e7c431d3bc make: Automake is complaining about .PRECIOUS being redefined
Yesterday I added test-suite.log as dependency to the .PRECIOUS
target. Automake is warning about this target being redefined
and from what I see there is no way I can stop the warning but
I can add the %MAKEFILE% as dependency.

automake warning:
Makefile.am:35: warning: user target '.PRECIOUS' defined here ...
/usr/share/automake-1.13/am/configure.am: ... overrides Automake target '.PRECIOUS' defined here

[zj: s/%MAKEFILE%/Makefile/ because %MAKEFILE% wasn't actually substituted properly.]
2013-07-19 19:13:59 -04:00
Zbigniew Jędrzejewski-Szmek d4d60b3169 man: also mention /run/log/journal in systemd-jouranld.service(8) 2013-07-19 19:04:19 -04:00
Lennart Poettering 19cace379f journald: after the cgroup rework processes may be in both user and system units at the same time 2013-07-19 19:52:30 +02:00
Lennart Poettering 83787333bd man: update documentation of systemctl cgroup commands 2013-07-19 19:29:08 +02:00
Lennart Poettering 847ae0ae7f man: update documentation of slice units a bit 2013-07-19 19:16:47 +02:00
Lennart Poettering 9365b048c0 man: update scope unit man page a bit 2013-07-19 19:04:17 +02:00
Lennart Poettering 3e2f69b779 man: update pam_systemd documentation to current state of the code 2013-07-19 18:52:09 +02:00
Lennart Poettering 7f0386f62c core: update configuration directive list "systemd --dump-configuration-items" shows 2013-07-19 18:45:11 +02:00
Lennart Poettering 1ec96668dd man: list scope and slice units in systemd(1) 2013-07-19 18:44:33 +02:00
Lennart Poettering 60211b3507 man: document sd_pid_get_slice() call of libsystemd-login 2013-07-19 18:10:12 +02:00
Lennart Poettering f7f74d8ec4 man: a few corrections to the machinectl man page 2013-07-19 18:00:21 +02:00
Lennart Poettering 431c72dc3d man: update systemd-nspawn regarding new --slice= logic 2013-07-19 17:55:52 +02:00
Lennart Poettering 3803cde44c man: extend systemd-run man page a little 2013-07-19 17:51:26 +02:00