Some device node refuses to be opened with read-write mode.
Let's not open with O_RDWR, but open with O_PATH, and use
FORMAT_PROC_FD_PATH().
Follow-up for 1abb592f2f.
Fixes#38033.
We recently added a new set of assertion macros such as ASSERT_GE,
ASSERT_OK, ASSERT_EQ, ... which show not only the expression that failed
but also the values of the arguments of the expression. Let's use them.
- use STRV_MAKE() macro,
- add several missing assertions,
- use more suitable ASSERT_XYZ() macros,
- drop TEST(dns_search_domain_unlink_all), as it is already tested in
TEST(dns_search_domain_new_system_limit).
Let's tighten the rules for picking up TTY information from utmp: let's
do so only for TTY session, nothing else. Apparently people have issues
with graphical sessions with certain terminal emulators that install
entries in utmp for each emulator window.
Alternative for: #38027
Prefixes would be nice, but they appear to be very buggy.
A few examples:
- `udevadm test-builtin net_setup_link /sys<TAB><TAB>`: `/sysblock/`
- `udevadm test-builtin net_setup_link /sys/<TAB><TAB>`: `/sys/bin/`
- `journalctl /dev<TAB>`: `/dev//dev/`
The tests are written and consumed by developers. Errno descriptions are good
for users, but for developers the errno "name" is actually more useful, and
we need to always map the description back to the name to compare with the
code. Let's make things simpler for ourselves by printing the errno names
directly.
Example output:
src/test/test-tests.c:15: Assertion failed: Expected "-1" to succeed, but got error: -1/EPERM
src/test/test-tests.c:16: Assertion failed: Expected "-ENOANO" to succeed, but got error: -55/ENOANO
src/test/test-tests.c:20: Assertion failed: Expected "0" to be positive, but it is zero.
src/test/test-tests.c:62: Assertion failed: Expected "RET_NERRNO(mkdir("/i/will/fail/with/enoent", 666))" to fail with error -55/ENOANO, but got -2/ENOENT
src/test/test-tests.c:68: Assertion failed: Expected "0" to fail with errno 2/ENOENT, but it succeeded
src/test/test-tests.c:70: Assertion failed: Expected "mkdir("/i/will/fail/with/enoent", 666)" to fail with errno 55/ENOANO, but got 2/ENOENT
In https://github.com/systemd/systemd/pull/38003, one test failed:
Unit tests / build (CLANG_ASAN_UBSAN):
src/test/test-cgroup-util.c:237: Assertion failed: Expected "r" to succeed, but got error: No such device or address
Checks for specific errors were added in ca82f0cbe2,
partially relaxed in e92d699dde.
cg_pidref_get_unit() and cg_pid_get_slice() enter a deep chain of calls,
so it's hard to guess where the failure occurred. But those two calls
expect the cgroup path to be "well formed". When we're running in CI,
we don't have full control over what is happening on the machine,
so let's suppress that error too.
The error message is not always meaningful. Also, sometimes we care about the
sign of the value, and we ignore the sign of the error in the printing machinery.
The messages for errno are changed to say "errno" instead of "error". The problem with
the previous formalation is that our errors are always negative and errnos are
positive, so when we print the numerical value, we cannot use the word for both.
Example output:
src/test/test-tests.c:15: Assertion failed: Expected "-1" to succeed, but got error: -1/Operation not permitted
src/test/test-tests.c:16: Assertion failed: Expected "-ENOANO" to succeed, but got error: -55/No anode
src/test/test-tests.c:61: Assertion failed: Expected "0" to fail with error -2/"No such file or directory", but it succeeded
src/test/test-tests.c:62: Assertion failed: Expected "RET_NERRNO(mkdir("/i/will/fail/with/enoent", 666))" to fail with error -55/"No anode", but got the following error: -2/No such file or directory
src/test/test-tests.c:68: Assertion failed: Expected "0" to fail with errno 2/"No such file or directory", but it succeeded
src/test/test-tests.c:70: Assertion failed: Expected "mkdir("/i/will/fail/with/enoent", 666)" to fail with errno 55/"No anode", but got the following errno: 2/No such file or directory
We can do this for int types, i.e. the variants where we expect a
success/error code. The macros which do generating comparison operations
also support floats so we shouldn't use intmax_t there.
The code is shorter and calling printf once is certainly more efficient.
ephemeral/ephemeral-import are described as possible '--mutable' options but
not present in the list. Note, "systemd-sysext --help" lists them correctly.
Refer to d766c75acd for the rationale
behind the udevd change.
systemd-journald.service conflicts with soft-reboot.target,
so make sure anything surviving soft-reboot and trying
to log to journal doesn't fail the socket units.
Alternative to b50f6dbe57
The commit naively returned early from socket_enter_running(), which however
is quite problematic, as the socket will be woken up over and over again
without doing a thing, until we eventually hit Poll/TriggerLimit*=.
On top of that it requires hacks to hold the start job for initrd-switch-root.service
up. Overall I doubt that is the right approach.
Let's instead hook this into our job engine, and try to activate
the service again when some other units are stopped. If all installed
jobs have been run yet we're still seeing the conflict or the manually
selected timeout is reached, fail the socket as before.
This partially reverts d766c75acd.
The offending commit tries to block systemd-udevd.service
from being activated during switch-root, but it is a dirty hack
and causes problems with e.g. Ctrl-Alt-Delete handling which
actually need to start a conflicting target. Let's revert
this here, and the original issue will be resolved in a cleaner
fashion in later commits.
Prior to this change, no user shell can be specified in the user
records passed into a container via --bind-user=. This new option
allows users to:
1. When false (the default), continue to specify no user shell for
each bound user record, resulting in the use of the container's
default shell for bound users.
2. When true, include each host user's shell in the corresponding
user record passed into a container (via --bind-user=).
3. When an absolute path, set that path as the user shell for each
user record passed into a container (via --bind-user=).
This does not change the existing behavior, but allows users to
opt-in to either copy the shells specified by the host user records
or override the shell explicitly by path.
This is a new meta value for the `Format=` option, which is equivalent
as specifying `Label=_empty` and `NoAuto=1` for compatibility with
sd-sysupdate.
Closes: https://github.com/systemd/systemd/issues/34596
We use symbols provided by unistd.h without including it. E.g.
open(), close(), read(), write(), access(), symlink(), unlink(), rmdir(),
fsync(), syncfs(), lseek(), ftruncate(), fchown(), dup2(), pipe2(),
getuid(), getgid(), gettid(), getppid(), pipe2(), execv(), _exit(),
environ, STDIN_FILENO, STDOUT_FILENO, STDERR_FILENO, F_OK, and their
friends and variants, so on.
Currently, unistd.h is indirectly included mainly in the following two paths:
- through missing_syscall.h, which is planned to covert to .c file.
- through signal.h -> bits/sigstksz.h, which is new since glibc-2.34.
Note, signal.h is included by sd-eevent.h. So, many source files
indirectly include unistd.h if newer glibc is used.
Currently, our baseline on glibc is 2.31. We need to support glibc older
than 2.34, but unfortunately, we do not have any CI environments with
such old glibc. CIFuzz uses glibc-2.31, but it builds only fuzzers, and
many files are even not compiled.
Before 50c81130b6, the function used
chase(), hence if root is an empty string, each config directory made
prefixed with the current working directory if it is relative. See
implementation of chase().
With 50c81130b6, conf_files_list_strv()
internally uses chaseat(), hence each config directory is not prefixed
anymore even if it is relative.
To restore the previous behavior, this makes
- if root is an empty string, prefix each config directories with the
current working directory if relative.
- if root is relative, make it absolute to make the prefixed results also
absolute, and debugging logs show absolute paths.
- use chaseat_prefix_root() to prefix the results, for safety.
Follow-ups for 50c81130b6.
And rename it to empty_or_root_harder_to_null(), as it also checks if
the input path effectively points to the root by calling path_is_root().
This also adds simple test cases for the function.
Yu Watanabe
dependabot[bot]
Yaping Li
DaanDeMeyer
Lennart Poettering
peelz
Zbigniew Jędrzejewski-Szmek
Vitaly Kuznetsov
Mike Yuan
Jim Spentzos
Nick Labich
Michael Ferrari