This will also allow debugging systemd-boot easily on RISC-V.
Note that the following much simpler variant won't work, as we might be missing
the optional 'zihintpause' extension:
asm volatile("pause");
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@codethink.co.uk>
unhexmem_full() ignores whitespace, so a 64-byte manifest digest field
can decode to fewer than 32 bytes. Reject that while parsing instead.
[ 83.883087] TEST-72-SYSUPDATE.sh[5995]: systemd-sysupdate: ../src/src/sysupdate/sysupdate-resource.c:581: resource_load_from_web: Assertion `h.iov_len == sizeof(instance->metadata.sha256sum)' failed.
Follow-up for 43cc7a3ef4
Assisted-by: kres (claude-opus-4-7)
Co-developed-by: Claude Opus 4.8 <noreply@anthropic.com>
manager_varlink_done() tore down the varlink server without dropping the
queued reload reply, unlike bus_done_api() which unrefs
pending_reload_message_dbus. Unref it here too, so the slot consistently
mirrors the D-Bus side at teardown.
Follow-up for 55a1b36e91
Assisted-by: kres (claude-opus-4-7)
Co-developed-by: Claude Opus 4.8 <noreply@anthropic.com>
After enumeration, networkd may receive RTM_NEWLINK messages carrying a
stale interface name. This can happen when interface rename notifications
are queued before link enumeration and processed afterwards.
Previously, networkd could become confused by such a message and put the
corresponding Link into the failed state. Avoid this by checking whether
the new interface name is already in use by another interface and ignoring
the rename if so.
Fixes#20203.
E.g. on issue #20203, we may wrongly remove entry for another interface.
Let's mitigate issue on such situation for safety, though this does not
solve the issue.
This reverts commit 176b8be10f.
The check introduced by the commit is racy, as when format_ifname() is
called, the interface may be already renamed (again) to another name.
This is typically problematic when we swap interface names:
```
ip link set aaa name tmpname
ip link set bbb name aaa
ip link set tmpname bbb
```
When networkd received the notification about name change aaa -> tmpname,
the interface is already renamed from tmpname to bbb. So, the reverted
logic skips updating Link.ifname:
```
aaa: New interface name 'tmpname' received from the kernel does not correspond with the name currently configured on the actual interface 'bbb'. Ignoring.
```
On the second notification about name change bbb -> aaa, networkd fails to
update the mapping Manager.links_by_name, as we skipped previous renaming
and the mapping still has an outdated entry for 'aaa'.
```
bbb: Interface name change detected, renamed to aaa.
aaa: Failed to manage link by its new name: File exists
aaa: Could not process link message: File exists
aaa: Failed
aaa: State changed: configured -> failed
```
By reverting the commit, the issue is fixed. But the commit intended to
fix another issue #20203. So this reintroduces #20203. Let's fix it
in a later commit.
Fixes#42527.
Reintroduces #20203.
The flags parameter is parsed into a global variable, which means
when there are multiple consecutive calls it is reused. Switch to
a local copy.
Follow-up for 066f6bfb62
Assisted-by: kres (claude-opus-4-7)
Co-developed-by: Claude Opus 4.8 <noreply@anthropic.com>
head_data_offset is declared as le64_t in journal-def.h, so it must be
assigned with htole64(p), not le64toh(p). All other le64_t field
assignments in this file (hash, next_hash_offset) consistently use
htole64().
On little-endian systems this makes no difference, but on big-endian
systems the field->data link would be stored with incorrect byte order,
corrupting journal file traversal.
Assisted-by: claude-opus-4-8 <noreply@anthropic.com>
So far --graceful only short-circuited when no TPM was present at all (the
!tpm2_is_mostly_supported() check). If a TPM is present but can't actually be
used for the measurement we want, the measurement still failed hard. For
systemd-pcrextend instances ordered before sysinit.target this pushes the
system to degraded and blocks boot, which defeats the purpose of --graceful.
Make the two extend helpers report every "TPM is present-or-absent but cannot
be used for this measurement" condition with a single errno, -EOPNOTSUPP: no
usable PCR bank, no TPM device, missing crypto (e.g. AES-128-CFB), no NvPCR
support, and OpenSSL-less builds. tpm2_context_new_or_warn() reports a missing
device as -ENOENT, so each helper translates that to -EOPNOTSUPP at the call
site, keeping every errno single-meaning.
Co-developed-by: Claude Opus 4.8 <noreply@anthropic.com>
The have_updatectl variable is meant to gracefully handle the case where
updatectl is missing. But, because the script runs with -e, it fails
immediately in that case instead. Moreover, expanding $have_updatectl
when it is present actually executes updatectl, rather than simply
checking for its existence.
Re-factor this check so that it does handle a missing updatectl.
When a slot is disconnected, previously we tried to remove the slot from
the hashmap with a wrong key. Hence, the pointer to the freed slot object
remained in the hashmap.
The cleanup destructor for VarlinkServerSocket only freed ss->address and
the struct, leaking ss->event_source. If sd_varlink_server_listen_address()
hits OOM at free_and_strdup() after the io-source was already armed, the
source stays registered in the event loop with userdata pointing at the
freed socket. Disable it before freeing; the call is a no-op when the
source was never armed, so the other freep sites are unaffected.
Follow-up for c14e841f31
Co-developed-by: Claude Opus 4.8 <noreply@anthropic.com>
bus_message_map_all_properties() fed the peer-supplied wire signature straight
into the variant dispatch and never compared it against the declared
prop->signature, so map_basic() wrote at the wire type's native width into a
slot sized for the declared type (over-wide numeric writes, peer-controlled
pointers into char** slots later freed by strv_free()). Compare against
prop->signature and skip the variant on mismatch.
This is in practice not a problem as the servers are trusted, and this
only affects clients.
Follow-up for 9f6eb1cd58
Assisted-by: kres (claude-opus-4-7)
Co-developed-by: Claude Opus 4.8 <noreply@anthropic.com>
The Bearers and Ports entries in the WWAN modem property maps declared
signatures "a{sv}" and "a{su}", but the callbacks read "ao" and "a(su)".
The mismatch was harmless while the declared signature was never checked,
but becomes a dropped property once it is enforced. Declare the actual
signatures.
Follow-up for f8a4c3d375
The SoftRebootsCount entry in the boot-times map declared signature "t" but the
manager exports it as "u". The mismatch was harmless while the declared signature
was never checked, but becomes a dropped property once it is enforced. Declare "u".
Follow-up for 259046cfe8
The SystemCallFilter entry in the security info map declared signature "(as)" but
its property_read_system_call_filter callback reads a "(bas)" (the manager exports
it as "(bas)"), matching the sibling RestrictAddressFamilies entry. The mismatch was
harmless while the declared signature was never checked, but becomes a dropped
property once it is enforced. Declare "(bas)".
Follow-up for ec16f3b6dd
The InvocationID entry in status_map declared signature "s" but its bus_map_id128
callback reads an "ay" (the manager exports it as "ay"), matching the other
bus_map_id128 callers. The mismatch was harmless while the declared signature was
never checked, but becomes a dropped property once it is enforced. Declare "ay".
Follow-up for f1d345ed76
Switch the model used by the Claude review workflow from Opus 4.8 to
Fable 5, both for the top-level invocation and the review subagents.
Co-developed-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The log message is informational only, same as the count of killed
processes, so we can safely use cgroup.kill when available instead
of manually recursing through the cgroup tree.
Only .dtbauto and .efifw may appear more than once, .hwids is a
singleton per the UKI specification and the stub reads a single .hwids
section (per profile), matching hardware IDs against entries within it.
Co-developed-by: Claude Opus 4.8 <noreply@anthropic.com>
Signed-off-by: Paul Meyer <katexochen0@gmail.com>
The UEFI specification only defines A/C/I/M/Zicsr/Zifencei as mandatory
extensions in boot services. However, on systems with everything built
with F/D support, its difficult to disable F/D without changing a
toolchain. In addition, both EDK2 and U-Boot enable F/D on boot,
although they neither enable nor disable V. EDK2 comments even claim the
enablement of FPU is "to be compliant with UEFI spec" despite the spec
requires dynamic detection before using F/D.
Add corresponding -march flags to prevent systemd-boot from using other
extensions on RISC-V, and a comment for the temporary enablement of F/D.
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>